Building the meter Base & service pole

With the meter base mounted on
the house, the hard work is complete!

   Two of the 4 wires are in.

Cutting holes in the log for the
3 gang switches involves
sawing, drilling and chiseling.

     It takes concentration not to
     drill all the way through the log.
     It just needs to be 4" deep.

Before drilling Bob used a SawsAll
and cut out the area for the switches.

 
   Bob works supervision from
   the master builder.

I
It's a bit warm doing wiring
in the attic even in the month of May

That scaffolding sure helps
a short guy get to tall places..